Cihaz açıldığında ezsetup komutu ile konfigürasyona başlıyoruz.

EZSetup Initializing..done.

Initial Setup Configuration
—————————

Enter System hostname [Optional]:

Enter new root password:
Re-enter the new password:

Enable Telnet service? [yes|no]. Default [no]:yes

Enable SSH service? [yes|no]. Default [yes]:

Switch Management
1: Configure in-band Management [interface vlan.XX]
2: Configure out-of-band management [me0.0]
Choose Option [1 or 2], default [1]:2
Configuring me0.0
Enter Management IP address [192.168.1.1]:10.0.0.101
Enter Subnetmask [255.255.255.0]:255.255.255.0
Enter Gateway IP address:10.0.0.1

Configure SNMP [yes|no], default [yes]:
SNMP Configuration
Contact information for administrator, Enter contact [Optional]:
Community name, Enter community [Optional]:EARTH
Physical location of system, Enter location [Optional]:ISTANBUL

Enter System Time and Date YYYY:MM:DD:hh:mm:ss [Optional]:2018:05:30:13:33:33

Time Zone [Optional], Enter “yes” to choose Timezone from list:

The input configuration parameters are

System Hostname:
Root password: ******
System Telnet Service: yes
System SSH Service: yes
Management IP Address: 10.0.0.101
SubnetMask: 255.255.255.0
Gateway IP Address: 10.0.0.1
Out-of-band management: me0.0
SNMP Community: EARTH
SNMP Location: ISTANBUL
SNMP Contact:
Time-Date: 2018:05:30:13:33:33
Time-zone:
Interfaces:
[: missing ]
ex2200-24p-4g: not found

Commit the new configuration?
Choosing option “yes” will add new configuration to existing configuration.
Option “No” will allow user to come out of EZSetup wizard.

Choose option [yes|no], default [yes]:yes

Committing the new configuration, please wait…..

Vakit bulabilirsem devamını da paylaşacağım.

The post Juniper Ex2200 İlk Konfigürasyon first appeared on Zafer Melih UNUTMAZ.